900303 Battery Pack

Model 900303 Add-On Battery Pack - P/N 001128
	900303 Analyzer with Battery Pack Installed

The Model 9003 Series gas analyzers are operated from external power - having a power cable that is connected to the power input jack on the right side of the case. The P/N 001128 Add-On battery pack is a field installable accessory that goes on the back of the 9003 and converts the analyzer into a totally free-standing unit, independent of the need for external power.

This means that the unit no longer has to be connected to system voltage to operate, making the unit much more convenient to use and impervious to voltage fluctuation in the equipment being tested (as, for example, when the vehicle is suddenly started or has a noisy generator). The battery pack operates the 9003 for a full day under full charge conditions, and recharges at night using a wall-mounted charger (included).

The Add-On battery pack is easily installed in the field to existing 9003 analyzers using simple hand tools. On its left side, it has its own power switch to turn the 9003 on or off. On its right side, it has the power cable to the 9003, a power jack to accept the wall charger, and an LED to indicate when it is seeing external power.

The battery pack is installed on the back of an existing 9003 using 4 self-tapping screws, and the pack housing tightly fits against the 9003 case, making for a tightly sealed and secure installation.

The battery pack may be charged from either the wall supply or from conventional system power using the standard 9003 power cable - which is removed when the power pack is installed. This flexibility means that even if the battery pack is fully discharged, the 9003 can still be operated in the conventional method or from the wall supply. The addition of the battery pack does not limit the equipment use - it only adds to the convenience and flexibility of use.

This field add-on kit makes the Model 9003 fully self-standing - providing a full 8 hours of operation capability from its own power source - making the Model 9003 a full featured standalone handheld analyzer.

	This view shows how the battery pack is installed so that its power cable goes in the 9003 at the same location as the 9003 external power cable normally does. Note that the battery pack also has a power jack for an external (charging and running) power source and power indicating LED on the right side, indicating when external power is applied.
	The internal view shows the battery pack itself (Advanced NiMH cells - having no memory effect, so they can be charged under any condition), the cutouts in the battery pack housing for the 9003 handle details, the power cable, external power socket, and external power indicating LED.

Model 900303 Add-On Battery Pack - P/N 001128