Model 900131 - Tri-Gas (CO/CO2/O2) Case-Ready Meat MAP Headspace Gas Analyzer

Model 900131 Case-Ready Meat MAP Headspace Gas Analyzer

Measures CO, CO2 and O2 Headspace to FDA Standards for both High O2 or Low O2 Case-Ready Meat Packaging.
100.00% O2 - Extended O2 Range for High O2.
0.001% O2 - Extended O2 Precision for Low O2.
Industrial NEMA-4 Design - Sealed for Line Environments.
Easy to use - Single button measurement in 12 Seconds.
Infrared for CO/CO2, Electro-Chemical with 2-Point Span for O2.
No Need for Calibration Gas - Stable, Long-Lasting Accuracy
Small (6" x 3" x 3"), lightweight (2.5 Lbs), and rugged.

900131 Specifications

Gases Measured:	Carbon Monoxide (CO), Carbon Dioxide (CO2), and Oxygen (O2)
Measurement Methods:	CO and CO2: NDIR (Non-Dispersive Infra-Red.) O2: Electro Chemical Sensor
Measuring Ranges:	CO: 0.000% - 1.000% CO2: 00.00-100.0% O2: 00.00-100.00%
Resolution:	CO: 0.001%, CO2: 0.01% O2: 0.001% Below 2.000%, 0.01% above 2.00%
Accuracy Repeatability	4% relative to gas reading. 1% relative to gas reading.
Response time:	8 seconds to 95% Final Reading, 12 Seconds to 99% Final Reading.
Sampling Rate:	5 ml/sec
Sample Time	Adjustable in 1 second increments. Factory default 12 Seconds.
Internal Gas Contaminate Protection	Internal water blocking and particle filter protects pneumatics and optical components from gas-borne contamination.
Start-up Warm-up:	10% Relative Gas Data 30 seconds from power up. Full accuracy in 5 minutes.
Operating Temperature:	0 to +40 degrees C.
Power:	Line: 110VAC (US) or 220VAC (EURO) Wall Supply Battery: NiMH battery pack, 6-8 hours operation per charge.
Battery Charger/ External Supply:	110 VAC/60 Hz Standard 220 VAC/50 Hz Optional
Weight:	Analyzer: 2.5 Lbs. In Soft Case: 3.5 Lbs.
Size:	Analyzer: 6 1/4" L x 3" W x 3 1/2 "H In Soft Case: 8 1/2" L x 5" W x 5" H
PC Interface:	Fully Sealed Serial Port, 9600 baud.