Bridge Analyzers, Inc.
1805-B Clement Ave.
Alameda, Calif. 94501

Contact Us:
Phone: (510) 337-1605
Fax: (510) 337-0388

Sales Information
Product Support 		 Model 9003 2-Gas CO/HC Hand Held Analyzers 
 Product Brochure & Specifications 

[ Home ] [ Material Handling ] [ Motorcycle / Rec. Vehicles ] [ Service/Warranty ]


Model 900323 Self-Powered CO/HC Gas Analyzer

Model 900323 Hand-Held 2 Gas Analyzer

Compact, Simple and Accurate.

Performance tuners have relied on CO/HC analyzers for years, but many shops are using 25 year old instruments. The Model 9003 is an excellent choice to replace outdated and unserviceable analyzers. It is a modern full-featured analyzer that combines hand-held convenience with the simplicity of a all-digital design. It is the simplest and easiest to use gas analyzer for performance tuning.

Performance you can count on.

The Model 900323 has been in production for over 5 years, its reliability has been proven in hundreds of installations around the world. As accurate as it is simple, its the perfect tool for basic gas analyzer diagnostics and tuning.

The 900323 is the analyzer of choice for major motorcycle manufacturers – an essential tool for performance tuning.

Flexible Operation on any engine.

The 900323 is a low flow analyzer with superior gas filtering – you can use it on 2 cycle or even diesel engines without concern of analyzer contamination. The low gas sampling rate does not diminish response time – it is still one of the fastest gas analyzers around.

With the Alternative Fuel Selection, you can analyze gasoline, propane, or methane powered engines without sacrificing accuracy.

Complete and ready to go.

The Model 900323 includes a built-in battery pack which provides 6 hours of cordless operation per charge. Battery charging power pack, exhaust probe and hose, cigarette lighter power plug and cable, vehicle battery clips, spare filter pack, carrying/storage case and manual are included. The analyzer is complete and ready to go as delivered.

900323 Product Configuration

900323 Specifications

Gases Measured: CO, HC Hexane (Gasoline), Propane (LPG), or Methane (CNG or LNG)
Analysis Method: Non Dispersive Infra-Red
Reporting Ranges: CO: 0-10%, HC (Hexane and Propane): 0-9999 ppm, HC (Methane) 0-5%
Resolution: CO: 0.01%, Hexane, Propane: 1 ppm, Methane: 0.001%
Accuracy: All gas channels ± 5% relative to gas reading.
Repeatability: All gas channels ± 3% full scale.
Response Time: < 10 Seconds to 90% final value. (8 ft sample line)
Data Display: 0.50 inch ‘Super Bright’ 7-segment LEDs, updated 4 times per second.
Zero Frequency: 5 minutes after power on, then every ½ hour.
Zero Time: < 30 seconds.
Operator Controls: ZERO Analyzer, CAL/Print Mode, UP Arrow, DOWN Arrow, Power Switch.
Warm-up Time: 30 seconds to 10% relative accuracy. < 5 minutes to full accuracy. (Constant external ambient conditions)
Total Power: 3 Watts
Battery Power : Rechargeable NiMH, 6 hours typical continuous operation per charge.
AC Power: 110 VAC/60 Hz Std., 95-220VAC/50-60 HZ optional.
Vehicle Power: Cigarette lighter socket, vehicle battery clips
Size: Main Body: 3.13"H x 4.50"W x 3.25"D
Total Including Handle and Strain-relief: 12.0"H x 4.50"W x 3.25"D.
Weight: Analyzer: Less than 2 lbs. Analyzer w/ Hose and Probe: less than 4 lbs.
Printer/PC Interface: DB9 RS-232 Connector, 9600 baud. Requires Serial Printer (P/N 106430) and/or PC software (P/N 106460).
Gas Sample Rate: 350 ml/min typical. (Flow control pneumatics system.)
Filter Life: Primary Filter (1 ea., 50 mm dia): 2 Months, typical.
Water Trap Filter (1 ea., 4 mm dia): 4 Months, typical.
Analyzer Filter (1 ea., 25 mm dia): 4 months, typical.
Gas Calibration: No periodic re-calibration required. Standard BAR calibration gases can be used for field calibration with adapter/regulator (P/N 000690).
Water Elimination: Automatic water elimination at the exhaust probe during Zero cycle.
Sample Probe: 10"Long Flexible Probe Tip (Stainless Steel Quick Release), Stainless steel ‘S’ bend, 50 mm dia. Primary filter, Water Trap, rigid plastic handle.
Sample Hose: 8 & 12 ft, 3/32 quick disconnect, 20 ft. total length
Temperature: –10 to +40 degrees C ambient.
Altitude: –100 to + 7,000 feet above mean sea level.
Reliability: 10,000 hrs MTBF.