Serial Printer - P/N 106430 |
 |
Every Bridge Analyzer
has the ability to directly interface with a serial printer. Hardcopy printout of gas readings can be obtained with a single push
of a button on the analyzer front panel. The printer is battery powered and connects to a serial port built into the analyzer.
Once connected and turned on, the thermal printer will produce
a hardcopy record of the gas readings being displayed when the ‘PRINT’ (Model
9004, 9005) or the ‘CAL’ (Model 9003) button is depressed. This function is
totally automatic, and allows the user to create hardcopy records of ‘before
and after’ test results or any other significant gas readings.
The printer is stored in cutouts in the analyzer
carrying/storage case as shown below. This is a very rugged printer designed
for portable use, and contained in a shock-resistant hard rubber case. It is
light (Less than 1 lb) and small (4.5 x 3.5 x 2.0 inches) - and will operate
for a full 12 hour day from one charge.
The hardcopy printout is produced within 5 seconds on 2.3 inch
wide thermal paper.
This view shows how the serial printer is stored in the analyzer
case along with the analyzer (in this case a Model 900503) The Printer comes
complete with its charger and interface cable to the analyzer.
The printer if fully compatible
with any series of Bridge Analyzer, and is stored in their equipment case for
ready use.