- CO, CO2 and O2 Measurement Specifically for Case Ready Meat.
- High Resolution 0.001% O2 & CO for Low-Ox.
- 100.0% O2 and CO2 Range for High-Ox.
- MAP Headspace Analyzer With Lo-Ox and Hi-Ox Capability.
- Sealed for Line Environments — Industrial NEMA-4 Design.
- Cordless Operation 14 Hours (900133).
- Fast and Easy to use . Test measurement in 15 Seconds.
- Stable, Trouble-free Infrared CO2.
- Unique Lo-Ox and Hi-Ox E-C O2 sensors for unmatched accuracy.
- Compact (6″x3″x3″), lightweight, and rugged.
| Gases Measured | Carbon Monoxide (CO), Carbon Dioxide (CO2), and Oxygen (O2) |
| Measurement Methods | CO and CO2: NDIR (Non-Dispersive Infra-Red.) O2: Electro Chemical Sensor |
| Measuring Ranges | CO: 0.000% – 1.000% CO2: 0.00% – 100.0% O2: 0.00% – 100.0% |
| Resolution | CO: 0.001%, CO2: 0.01%, O2: 0.01% above 2.00%, 0.001% Below 2.000% |
| Accuracy | 4% relative to gas reading |
| Repeatability | 1% relative to gas reading |
| Response Time | 99% Final Reading in 15 Second. |
| Sampling Rate | 4 ml/sec |
| Sample Time | Factory default 15 Seconds. Adjustable in 1 second increments. |
| External Gas Contaminate Protection | Pencil-point cross-drilled sample needle and customer serviceable particle/liquid blocking filter. |
| Internal Gas Contaminate Protection | Internal particle/water blocking filter protects pneumatics and optical components from gas-borne contamination. |
| Warm-Up | Full accuracy in 3 minutes. |
| Operating Temperature | 0 to +40 degrees C. |
| Power | Line Power: 110VAC / 220VAC Regulated Wall Supply Internal Battery: NiMH battery pack, 14 hours per charge. |
| Weight | Unit Alone: 2.5 Lbs. In Soft Case: 3.5 Lbs. |
| Size | Unit Alone: 6 ¼ L x 3W x 3 ½H In Soft Case: 8 ½ L x 5W x 5H |
| PC Interface | Fully Sealed Serial Port, 9600 baud. |